The modular platform strategy serves as the basis for the many benefits of the new drum motor generation. Thanks to its modular flexibility, the new drive generation makes it significant easier to plan and implement highly efficient and user-specific material-handling solutions.

Learn more about the new Drum Motors!

Drum Motor benefits

More options, one drive solution: An extended number of gear stages broadens the range of speeds so that one drive solution is sufficient for all current and future uses. Furthermore, all options like encoders, brakes, or backstops are available for all motors.

More performance, more configurations: The extended range of variants for the motors from 40 W to 1100 W covers all conceivable uses in the food industry, material handling, and manufacturing.

Tested quality, innovative technology: All motor components are standardized, and thoroughly tested. For our customers this means shorter delivery times.

Simplified construction, more service, lower costs: Since all motors have the same shafts, the variety of parts is reduced to a Minimum, resulting in a fundamentally easier conveyor construction - no matter if a synchronous motor or an asynchronous motor is needed. Replacement parts are available worldwide through Interroll and service partners provide fast and professional repairs.

Flexibility: watch the animation

More stable: The 30 mm shaft on Interroll’s new drum motors is significantly stronger, allowing for higher belt Tension as it does not bend even under higher load and at the same time, protects the ball bearings. The customers is on the safe side even with a non-optimal belt tensioning.

Reliable operation: A stable planetary gear box allows a high torque in all motors, holds up against bending, and resists against overload and impact load. The result is safer, more reliable operation.

Certified quality: All critical components and mechanical connections have been subject to stringent and comprehensive endurance testing. Our engineering laboratory's expertise has been confirmed by practical tests with customers.

Robustness: watch the animation

All drum motors in the new generation meet the highest requirements and are fitted with the highest degree of IP69k protection, which makes cleaning the facility much faster and easier and also reduces the risk of product contamination in the food processing area.

The PTFE-sealing allows a high pressure cleaning with chemicals according to ECOLAB specifications.

 

 

Ultra-hygienic: watch the animation

The new drum motor platform is not only easy to operate but also to install, mount, and maintain. The plug-in cable connection serves as a true plug-and-play solution for faster, easier initial installation, maintenance, and repairs.

Complete disassembly is not needed for motor maintenance or the replacement of a damaged cable. Customers save time, lower costs and reduce potential downtime.

Plug-and-play: watch the animation

The modular design of the drum motor allows a free combination of individual module groups, such as shaft, end cover, shell, steel or technopolymer gear, asynchronous or synchronous motor winding, to perfectly and cost optimized meet the requirements of an application.

DM 0080

Motor technology  Asynchronous  Asynchronous  Asynchronous  Asynchronous  Synchronous 
No. phase  3-phase  3-phase  1-phase  1-phase   
Diameter  81.5 mm   81.5 mm   81.5 mm   81.5 mm   81.5 mm 
Material gearbox  Steel  Technopolymer  Steel  Technopolymer  Steel 
Rated power  40 - 140 W  40 - 75 W  25 - 110 W  25 - 110 W  145 - 425 W 
Rated torque  1.2 - 59.8 Nm  3.2 - 20.3 Nm  0.8 - 39,2 Nm  4.5 - 21.4 Nm  2.1 - 65.0 Nm 
Max. Belt pull   1467 N  498 N  961 N  525 N  1594 N 
Velocity of the shell  0.03 - 2.50 m/s  0.07 - 0.87 m/s  0.05 - 2.49 m/s  0.05 - 0.9 m/s  0.08 - 2.72 m/s 
Drum width (FW)  200 - 1200 mm   239 - 1200 mm  250 - 1200 mm  287 - 1200 mm  192 - 1200 mm 
Friction drive belt           
Positive drive belt     
Without belt      

DM 0113 and DM 0138 (available September 2018)

Motor technology  Asynchronous  Asynchronous  Synchronous  Asynchronous 
No. phase  3-phase  1-phase    3-phase 
Diameter  113 mm   113 mm   113 mm   138 mm 
Material gearbox  Steel  Steel  Steel  Steel 
Rated power  160 - 550 W  250 W  300 - 1100 W  160 - 1000 W 
Rated torque  6.7 - 157 Nm  19.1 - 71.5 Nm  5.4 - 132.7 Nm  15.7 - 238.3 Nm 
Max. Belt pull   2779 N  1265 N  2349 N  3454 N 
Velocity of the shell  0.05 - 1.85 m/s  0.18 - 0.67 m/s  0.16 - 2.96 m/s  0.04 - 2.29 m/s 
Drum width (FW)  257 - 1400 mm   297 - 1400 mm  207 - 1400 mm  307 - 1600 mm 
Friction drive belt         
Positive drive belt       
Without belt        

DM 0138

Available September 2018

Show product

Would you like to be contacted by our Sales Team?

Contact me